Frasen Indoor/Outdoor Side Table

A GUIDE TO CARE FOR
Reinforced Concrete
MAINTAINING YOUR FURNITURE
Our fiber reinforced concrete is a porous material
(much like natural wood or stone) comprised
completely of natural elements including Portland
cement, jute fibers, and water. Each piece comes
sealed with a paraffin-based wax sealer and
requires regular waxing for continued protection
against staining. We recommend applying stone
floor wax with paraffin base within 2 months of
installation (Caution: do not place objects on your
piece within 12 hours of applying wax). If pieces are
used outdoors, wax generously beforehand, then
cover and keep raised off the ground when not in
use. Do not let pieces sit in water. Prior to exposing
to freezing temperatures, make sure pieces are dry
and covered. We recommend re-waxing every 3
months and re-sealing every 2 years.

TO BE EXPECTED
The wear of your product contributes to its
uniqueness. Reinforced concrete is intended to
develop a patina and improve with time. Cracks
and variation in color are normal. Non-structural
hairline cracks are possible and may result from
shrinkage and the natural curing process. If minor
cracks appear, immediately apply a thick coat
of wax and rub in well to prevent moisture from
seeping into cracks and causing discoloration.

SPOT CLEANING
Spills, especially oils, should be wiped up as soon
as possible with mild soap (dish soap) and water to
minimize staining. Do not use abrasives, bleachbased, ammonia-based, citrus-based, or natural
cleaners, which can wear down wax protection. If
wax coating is scratched or damaged, apply a new
coat of wax.


KEEP IN MIND...
While sealant will perform well against most stains,
prolonged exposure to oils and acidic materials may
result in penetration and possible discoloration.
To avoid discoloration, do not place hot objects
directly on the surface. Use trivets, coasters, felt
pads, or rubber pads if placing objects onto the
surface. Do not use blue painter’s tape or other
adhesives on your piece.